to mobile version
English
Choose a language Choose a language
You have 0 samples requested
METOLAT® 1299

METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It provides the following properties:

  • Effective in hard or soft water up to 100°C
  • Effective over a wide pH range

Properties/Applications

  • Detergent additive for cleaners
  • Wallpaper removers
  • Overprint varnishes
  • Plastic dispersions
Reserve Product Sample
METOLAT® 1299   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 285

Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood.

METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.

Properties/Applications

  • Production of phosphoric acid by the wet process: METOLAT 285 is added to the reaction mix at a ratio of 0.02 - 0.05 %
  • on solids weight.
  • The addition of defoamer makes filtration more effective and gives a higher yield in phosphoric acid and secondary products like gypsum.
  • In contrast to defoaming agents based on tall oil, AGITAN 285 causes no deposit in storage vessels.
  • Quarternary ammonium compounds are mainly used in cleaning products which tend to foam.
  • METOLAT 285 is a special defoamer for these products and can be used either undiluted or pre-diluted in water.
  • Normally a dosage of 3 to 5 % on weight of quarternary ammonium compounds is sufficient.
  • Experiments have shown that METOLAT 285 has a positive impact on microbiological behaviour of cleaning products.
  • METOLAT 285 can also be used to eliminate wetting defects, caused by high levels of defoamer.
  • Normal dosage ranges from 0.1 to 0.5 % on finished product.
Reserve Product Sample
METOLAT® 285   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 288

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

Properties/Applications

  • Ladder studies are necessary to determine optimum level. Normal dosage ranges from 0.1 - 2.0 % METOLAT 288 on finished product.
  • It should be added to the water, when used in the manufacture of emulsions.
Reserve Product Sample
METOLAT® 288   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 340

METOLAT 340 is a low foaming non-ionic wetting agent for water-based systems.
It improves substrate wetting and leveling by reduction of surface tension.

Dynamic surface tensions:
1 % at 1 Hz: 21 mN/m
1 % at 10 Hz: 34 mN/m

Reserve Product Sample
METOLAT® 340   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 342

METOLAT® 342 is a low foaming non-ionic wetting agent for water-based systems.
It improves substrate wetting and leveling by reduction of surface tension.

Dynamic surface tensions:
1 % at 1 Hz: 29 mN/m
1 % at 10 Hz: 42 mN/m

Reserve Product Sample
METOLAT® 342   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 348

METOLAT® 348 is a low foaming non-ionic wetting agent for water-based systems.
It improves substrate wetting and leveling by reduction of surface tension.

Reserve Product Sample
METOLAT® 348   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 355

METOLAT® 355 is a wetting agent with low foam tendencies, suitable for many aqueous systems. Due to its nonionic character METOLAT® 355 is compatible with many different raw materials with broad pH stability. It provides excellent pigment and substrate wetting. METOLAT® 355 improves pigment compatibility and leveling in emulsion paints and water reducible systems.

Properties/Applications

  • Ladder studies are recommended to determine optimum levels. Normal dosage ranges from 0.1 to 0.5 % on total formulation.
  • Treat levels of 1 to 3 % on solids are necessary for intense colours. METOLAT 355 can be added at any time during production.
Reserve Product Sample
METOLAT® 355   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 362

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

Properties/Applications

Dynamic surface tension:

0,1 % at 1 Hz: 31 mN/m

0,1 % at 10 Hz: 44 mN/m

0,5 % at 1 Hz: 26 mN/m

0,5 % at 10 Hz: 33 mN/m

Reserve Product Sample
METOLAT® 362   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 364

METOLAT 364 is a APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.

Main applications

- Drawing
- Stamping
- Corrosion protection
- Grinding
- Forging
- Forming

Reserve Product Sample
METOLAT® 364   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 365

METOLAT 365 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 365 improves substrate and pigment wetting. It shows a very broad pH stability.

Properties/Applications

Dynamic surface tension:

0,1 % at 1 Hz: 27 mN/m

0,1 % at 10 Hz: 44 mN/m

0,5 % at 1 Hz: 26 mN/m

0,5 % at 10 Hz: 31 mN/m

Reserve Product Sample
METOLAT® 365   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 366

METOLAT 366 is a low foaming non-ionic wetting agent for water-based printing inks, adhesives and clear as well as pigmented coatings. It improves substrate wetting and levelling by reduction of surface tension. METOLAT 366 shows defoaming properties in many systems.

Properties/Applications

Dynamic surface tensions:

0.1 % at 1 Hz: 56 mN/m

0.1 % at 10 Hz: 59 mN/m

0.5 % at 1 Hz: 26 mN/m

0.5 % at 10 Hz: 37 mN/m

Reserve Product Sample
METOLAT® 366   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 367

METOLAT 367 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. METOLAT 367 is specifically suitable for systems in contact with food. The product is VOC free according to

2004/42/EC.

Properties/Applications

Dynamic surface tensions:

0.1 % at 1 Hz: 47 mN/m

0.1 % at 10 Hz: 63 mN/m

0.5 % at 1 Hz: 29 mN/m

0.5 % at 10 Hz: 53 mN/m

Reserve Product Sample
METOLAT® 367   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 368

METOLAT 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. The product is VOC free according to 2004/42/EC.

Properties/Applications

Dynamic surface tensions:

0.1 % at 1 Hz: 54 mN/m

0.1 % at 10 Hz: 62 mN/m

0.5 % at 1 Hz: 28 mN/m

0.5 % at 10 Hz: 32 mN/m

Reserve Product Sample
METOLAT® 368   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 388

METOLAT® 388 is a low foaming wetting agent which is suitable for many aqueous
and non-aqueous systems. It improves the pigment dispersion in emulsion paints
especially with pigments which are difficult to disperse.
METOLAT® 388 prevents flocculation of the particles caused by emulsifier migration
after long storage of the paint or through a mechanical or thermal shock.

Application/Properties

  • METOLAT® 388 is biodegradable and is recommended specifically for environmental
    safe systems.
Reserve Product Sample
METOLAT® 388   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4010

MUNZING's METOLAT 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4010   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4015

MUNZING's METOLAT 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4015   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4020

MUNZING's METOLAT 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4020   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4030

MUNZING's METOLAT® 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4030   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4040

MUNZING's METOLAT 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4040   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 4050

MUNZING's METOLAT 4000 series are APEO-free wetting agents with excellent equilibrim and dynamic surface tension reduction. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

Main applications:

  • Drawing
  • Stamping
  • Corrosion protection
  • Grinding
  • Forging
  • Forming
Reserve Product Sample
METOLAT® 4050   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 700

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Application

     

  • Printing ink

  • Overprint varnishes
  • Coatings; architectural, wood and industrial
  • Adhesives

Reserve Product Sample
METOLAT® 700   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 725

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Application

     

  • Printing ink

  • Overprint varnishes
  • Coatings; architectural, wood and industrial
  • Adhesives

Reserve Product Sample
METOLAT® 725   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 750

MUNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT® 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Application

     

  • Printing ink

  • Overprint varnishes
  • Coatings; architectural, wood and industrial
  • Adhesives

Reserve Product Sample
METOLAT® 750   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 775

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Application

     

  • Printing ink

  • Overprint varnishes
  • Coatings; architectural, wood and industrial
  • Adhesives

Reserve Product Sample
METOLAT® 775   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® 780

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Application

  • Printing ink
  • Overprint varnishes
  • Coatings; architectural, wood and industrial
  • Adhesives
Reserve Product Sample
METOLAT® 780   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® SC-40

METOLAT SC-40 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

Application/Properties

     

  • Pigment and filler wetting in seed coatings and agricultural adjuvants

Reserve Product Sample
METOLAT® SC-40   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
METOLAT® SC-43

METOLAT SC-43 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

Application/Properties

     

  • Pigment and filler wetting in seed coatings and agricultural adjuvants

Reserve Product Sample
METOLAT® SC-43   100 ml

Technical Data Sheet
PDF
Material Safety Data Sheet
PDF
Reserved Product Sample
0 product sample
NEWS
03.05.2020

MÜNZING extends portfolio of ORGANIC CERTIFIED food additives

MÜNZING’s antifoams for food processing MAGRABAR® 4000 and MAGRABAR® 4010 are now certified ORGANIC.[more]