Building & Construction Products
Products
AGITAN 100 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.
AGITAN 290 was developed specifically for defoaming of polyvinyl-alcohol (PVA)- solutions and highly acidic media (pH 0.5). Color and transparency of PVA films are not affected by the defoamer. In acidic decalcifying and cleaning agents foam is reduced significantly by AGITAN 290 allowing faster and more thorough working. AGITAN 290 is absolutely silicone-free and ashless. It is very persistent in acidic media and effective from room temperature up to 95 °C.
AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.
AGITAN P 800 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 800 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN® P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.
AGITAN P 804 is recommended in such cases where oil based defoamers do not work. It is used in dry blends which are dissolved in water before application. The addition of AGITAN P 804 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN P 813 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 813 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 813 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.
AGITAN P 823 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 823 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 823 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.
AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortat systems AGITAN P 833 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.
AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN® P 842 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 842 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems the product shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. The use AGITAN® P 842 results in smooth surfaces. Main applications: Joint fillers and putties Self-leveling compounds Screeds (cement and anhydride based) Mortars
AGITAN P 845 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 845 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 845 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN® P 846 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 846 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In mortar systems AGITAN® P 846 shows a plasticizing effect, meaning flow and leveling are enhanced. Additionally, AGITAN® P 846 improves wetting of synthetic fibers as tehy are used for improving the mechanical properties of repair and leveling mortars. Main applications: Self-leveling compounds Screeds (cement-based) Cement Mortars
AGITAN P 8850 is a cost effective and economical powder defoamer specifically designed for use in grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.
DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency. This defoamer is also alkali and acid resistant since it can be used in a pH- range between 3 and 11.
FENTAK® TC 19550 is an opaque black water based anti-corrosion primer, which is designed specifically for application to reinforcing rod used in autoclaved aerated concrete (AAC) casting.
FOAMTROL 105 is a low viscosity silicone compound that is designed to meet specific performance requirements efficiently and economically in industrial applications. It is used in non-aqueous and, in many instances, aqueous products and systems. It is readily pourable and may be used to prepare silicone-based foam preventive emulsions.
Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.
METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.
METOLAT P 530 is recommended for grinding and dispersing pigments and dyes in aqueous systems. It reduces the mill base viscosity which allows preparation of higher concentrated dispersions. METOLAT P 530 is particularly recommended for dispersing of carbon black. It acts as protective colloid in aqueous dispersions and emulsions. In the building industry METOLAT P 530 is recommended for plasticizing cement based mortars. It increases mortar density without reducing the long-term strength of the concrete. METOLAT P 530 does not influence the foam tendency of aqueous systems. It is resistant to salts, alkaline and acidic environment. It is compatible with most anionic and non-ionic additives. Cationic products may be flocculated by METOLAT P 530. METOLAT P 530 is suitable for wire drawing.
METOLAT P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength is increased and the pigment can be used more efficiently. METOLAT P 588 improves the homogeneous distribution of the pigments and prevents their floading to the surface. In powder paints the use of METOLAT P 588 prevents rub-out effects. METOLAT P 588 also prevents efflorescence („lime bloom“).
METOLAT P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength is increased and the pigment can be used more efficiently. METOLAT P 590 improves the homogeneous distribution of the pigments and prevents their floading to the surface. In powder paints the use of METOLAT P 590 prevents rub-out effects. METOLAT P 590 also prevents efflorescence („lime bloom“).
METOLAT P 854 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application. The use of METOLAT P 854 significantly improves wetting of pigments and extenders.
METOLAT P 860 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 860 reduces shrinkage in cementitious systems and acts as coalescent in powder paints.
METOLAT P 861 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 861 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.
METOLAT P 871 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 871 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.
METOLAT P 872 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 872 reduces the shrinkage in cementitious systems.
METOLAT P 874 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 874 reduces the shrinkage in cementitious systems.
TAFIGEL AP 10 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 10 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 15 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 16 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 16 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints,silicate paints, high pH coatings, latex paints, anti- corrosive paints, emulsion plasters, adhesives, joint fillers, industrial and institutional cleaners and car care
TAFIGEL PUR 64 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 64 R is a bio-based drop-in for TAFIGEL PUR 64. It is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 R exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 R can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.
WÜKONIL® KN 50 is an established additive for after treatment of ready-mixed and formed concrete. The treatment of the concrete surface with WÜKONIL® KN 50 improves water retention in the concrete and enables a good set. Also at elevated outdoor temperatures it is not necessary to splash water on the concrete surface or to make a covering.
WÜKONIL® RT 50 is a paraffin wax dispersion for water based coatings.
