Adhesives & Heatseal

Products

Adhesives & Heatseal

Product Filters

A previous selection has been automatically applied. To view all products reset the filters.
20%
100%
143°C
151°C
D₉₉
< 18µm
< 18µm
D₅₀
< 5.5µm
< 5.5µm
7
7
0%
100%

View:

68 Products Found

EMEA · America · Asia/Oceania

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

EMEA · America · Asia/Oceania

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. The resulting emulsion is not stable against separation and has to be stirred before use.

EMEA · America · Asia/Oceania

AGITAN 271 is a special composition with excellent stability and high efficiency. The product is alkali and acid resistant and can be used in a pH-range between 3 and 12.

EMEA · America · Asia/Oceania

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

EMEA · America · Asia/Oceania

AGITAN 290 was developed specifically for defoaming of polyvinyl-alcohol (PVA)- solutions and highly acidic media (pH 0.5). Color and transparency of PVA films are not affected by the defoamer. In acidic decalcifying and cleaning agents foam is reduced significantly by AGITAN 290 allowing faster and more thorough working. AGITAN 290 is absolutely silicone-free and ashless. It is very persistent in acidic media and effective from room temperature up to 95 °C.

EMEA · America · Asia/Oceania

AGITAN 298 should be used without further dilution.

EMEA · America · Asia/Oceania

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

EMEA · America · Asia/Oceania

AGITAN 305 is recommended for aqueous emulsion systems. The product is a physiologically harmless defoamer. AGITAN 305 is compatible with all common binders.

EMEA · America · Asia/Oceania

AGITAN 351 is a special composition with excellent stability and high efficiency. AGITAN 351 is alkali and acid resistant and can be used in a pH-range between 3 and 12.

EMEA · America · Asia/Oceania

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 12.

EMEA · America · Asia/Oceania

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. A non-ionic structure provides excellent compatibility with most common binders.

EMEA · America · Asia/Oceania

AGITAN® 760 N is a highly effective siloxane defoamer for water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

EMEA · America · Asia/Oceania

AGITAN 761 is a highly effective siloxane defoamer for water reducible systems. It is particularly effective in aqueous printing inks. The nonionic structure provides excellent compatibility with most common binders.

America · Asia/Oceania · EMEA

AGITAN® 784 is a defoamer with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. AGITAN® 784 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. Main applications: Corrugated printing inks Packaging inks Printing inks for coated paper Heat-set adhesives Natural rubber / Neoprene latex-based adhesives OPV formulations Clear coatings Industrial coatings Wood coatings

AGITAN® 786N contains a high performance organo modified siloxane in combination with a polyoxyalkylene glycol carrier. AGITAN® 786N was designed to provide superior defoaming persistence and excellent dispersibility in a variety of aqueous coatings formulations without causing wetting defects such as craters or fisheyes.

EMEA · America · Asia/Oceania

AGITAN DF 999 should be used without further dilution.

EMEA · America · Asia/Oceania

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency. This defoamer is also alkali and acid resistant since it can be used in a pH- range between 3 and 11.

EMEA · America · Asia/Oceania

DEE FO 2020E/50 is a highly persistent and cost effective oil-based defoamer specially designed for use in most emulsion polymers including EVA, VA, and acrylic formulations. It also provides excellent cost effectiveness in many adhesive applications, such as PSA, laminating, packaging, envelope and label, and construction formulations.

EMEA · America · Asia/Oceania

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

EMEA · America · Asia/Oceania

DEE FO 3010E/50 is a highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

EMEA · America · Asia/Oceania

A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coatings formulations as well.

EMEA · America · Asia/Oceania

A high efficiency foam control additive designed especially for OPV and most printing inks, such as corrugated, coated paper, packaging, film and foil.

EMEA · America · Asia/Oceania

An industry standard that provides formulators with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. DEE FO PI-40 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives.

EMEA · America · Asia/Oceania

DEE FO PI-547 is a universal oil free product designed for use in many industries including PVOH adhesives, high solids content coatings and printing ink. Aqueous ink systems include flexible film, OPV and metallic.

EMEA · America · Asia/Oceania

EDAPLAN 516 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. EDAPLAN 516 is compatible with many emulsion polymers. It can be used over a wide pH range and prevents the formation of settlements and stabilizes the system. EDAPLAN 516 is particularly suitable for dispersion of titanium dioxide, sheet silicates and fillers to achieve a constantly low paste viscosity.

EMEA · America · Asia/Oceania

FOAMTROL 105 is a low viscosity silicone compound that is designed to meet specific performance requirements efficiently and economically in industrial applications. It is used in non-aqueous and, in many instances, aqueous products and systems. It is readily pourable and may be used to prepare silicone-based foam preventive emulsions.

EMEA · America · Asia/Oceania

LEUKONÖL LBA-2 is a wetting agent, suitable for many aqueous systems. It provides excellent emulsifying and stabilizing properties, specifically in the manufacturing process of emulsion polymers. LEUKONÖL LBA-2 is clearly soluble at pH 13. It is the ideal wetting agent for alkaline systems.

EMEA · Asia/Oceania · America

LUBA-print® 164/R is a wax dispersion used to improve antiblocking, slip and scratch resistance in aqueous lubricant and release agent / waterbased lacquers. As a pelletizing aid for granule technique, the additive will be used in underwater pelletizing and keeps the granules non-sticking and free-flowing.

EMEA · America · Asia/Oceania

METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems.

EMEA · America · Asia/Oceania

Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.

EMEA · America · Asia/Oceania

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

EMEA · America · Asia/Oceania

METOLAT 340 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.

EMEA · America · Asia/Oceania

METOLAT 342 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.

EMEA · America · Asia/Oceania

METOLAT 344 is a low foaming wetting agent for all common aqueous systems. The product strongly reduces the static and dynamic surface tension and improves wetting and flow, especially on substrates that are difficult to wet. It has been specially developed to increase the penetration of wood coatings.

EMEA · America · Asia/Oceania

METOLAT 348 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.

EMEA · America · Asia/Oceania

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

EMEA · America · Asia/Oceania

APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.

EMEA · America · Asia/Oceania

METOLAT 366 is a low foaming non-ionic wetting agent for water-based printing inks, adhesives and clear as well as pigmented coatings. It improves substrate wetting and levelling by reduction of surface tension. METOLAT 366 shows defoaming properties in many systems.

EMEA · America · Asia/Oceania

METOLAT 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. The product is VOC free according to 2004/42/EC.

EMEA · America · Asia/Oceania

EMEA · America · Asia/Oceania

METOLAT 388 is a low foaming wetting agent which is suitable for many aqueous and non-aqueous systems. It improves the pigment dispersion in emulsion paints especially with pigments which are difficult to disperse. METOLAT 388 prevents flocculation of the particles caused by emulsifier migration after long storage of the paint or through a mechanical or thermal shock. METOLAT 388 is biodegradable and is recommended specifically for environmental safe systems. METOLAT 388 is suitable for wire drawing.

EMEA · America · Asia/Oceania

METOLAT 514 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. METOLAT 514 is compatible with many emulsion polymers. It can be used over a wide pH range. METOLAT 514 reduces the mill base viscosity and provides higher pigment volume concentrations. It prevents the formation of settlements and stabilizes the system.

EMEA · America · Asia/Oceania

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements.

EMEA · America · Asia/Oceania

EMEA · America · Asia/Oceania

EMEA · America · Asia/Oceania

EMEA · America · Asia/Oceania

METOLAT 780 is an APEO-free wetting agent that is formulated to provide excellent equilibrium and dynamic surface tension reduction without excess foam generation for a wide range of coating and ink applications.

EMEA · America · Asia/Oceania

TAFIGEL AP 10 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 10 requires an alkaline pH-value (>8) for optimum efficiency.

EMEA · America · Asia/Oceania

TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 15 requires an alkaline pH-value (>8) for optimum efficiency.

EMEA · America · Asia/Oceania

TAFIGEL AP 16 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 16 requires an alkaline pH-value (>8) for optimum efficiency.

TAFIGEL® AP 75 N is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL® AP 75 N requires an alkaline pH-value (>8) for optimum efficiency. Main applications: Decorative Coatings Industrial and wood coatings Architectural coatings Adhesives Printing inks Paper coatings Conforms with 21 CFR 176.170 and 176.180: When used at a maximum level of 1% in coatings applied to uncoated or clay coated paper and paperboard at a maximum rate of 6 lb/1000 ft2 (wet basis).

EMEA · America · Asia/Oceania

TAFIGEL PUR 41 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 41 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 41 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

EMEA · America · Asia/Oceania

TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints,silicate paints, high pH coatings, latex paints, anti- corrosive paints, emulsion plasters, adhesives, joint fillers, industrial and institutional cleaners and car care

EMEA · America · Asia/Oceania

TAFIGEL PUR 45 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 45 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 45 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 45 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, emulsion plasters, adhesives, printing inks and joint fillers.

EMEA · America · Asia/Oceania

TAFIGEL PUR 52 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 52 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 52 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties, industrial and institutianal cleaners.

EMEA · America · Asia/Oceania

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks.

EMEA · America · Asia/Oceania

TAFIGEL PUR 54 R is a bio-based drop-in for TAFIGEL PUR 54. It is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 R can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 54 R is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks.

EMEA · America · Asia/Oceania

TAFIGEL PUR 55 is designed as a solvent-free “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. Aqueous paints with TAFIGEL PUR 55 show minimum pseudoplasticity, similar to rheology profiles of solvent borne lacquers. It can be used alone or in combination with other TAFIGEL thickeners, as well as with cellulosic and acrylic thickeners. TAFIGEL PUR 55 is recommended for use in following systems: Interior/ exterior architectural paints, high gloss coatings, anti- corrosive paints, emulsion plasters, printing inks, adhesives and joint fillers.

EMEA · America · Asia/Oceania

TAFIGEL PUR 56 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 56 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 56 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

EMEA · America · Asia/Oceania

TAFIGEL PUR 60 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 60 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 60 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

EMEA · America · Asia/Oceania

TAFIGEL PUR 61 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 61 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 61 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners. TAFIGEL® PUR 61 has been optimized for easy handling and easy incorporation. In many cases, the thickener can also easily be used in post-dosing.

EMEA · America · Asia/Oceania

TAFIGEL PUR 64 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.

EMEA · America · Asia/Oceania

TAFIGEL PUR 64 R is a bio-based drop-in for TAFIGEL PUR 64. It is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 R exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 R can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.

EMEA · America · Asia/Oceania

TAFIGEL PUR 80 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 80 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 80 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 80 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

EMEA · America · Asia/Oceania

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

EMEA · America · Asia/Oceania

TAFIGEL PUR 82 R is a bio-based drop-in for TAFIGEL PUR 82. It is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients.TAFIGEL PUR 82 R can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 R show minimal pseudoplasticity, similar to the rheology of solvent borne systems.

America · Asia/Oceania · EMEA

TAFIGEL® PUR 84 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL® PUR 84 can be used alone or in combination with other TAFIGEL® thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL® PUR 84 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL® PUR 84 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. Advantages of using TAFIGEL® PUR 84: thickening independent of pH excellent flow, leveling and gloss good spatter resistance excellent colour acceptance on tinting The performance of polyurethane thickeners is affected by many factors including binder type, co-solvents, coalescing agents, surfactants/wetting agents, pigments and flattening agents. The interactions of TAFIGEL® PUR 84 with these compounds allow varied possibilities for rheology adjustment.

EMEA · America · Asia/Oceania

TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

Contact