ZINPLEX 15

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

METOLAT ETC 1 is a surface additive which provides easy to clean surfaces, reduced adhesion of spray paints and increased marker resistance. It also guarantees pronounced tape release and slip properties. It should only be used in solvent-based systems. Due to its hydroxy functionality, it can be permanently anchored in the binder matrix using suitable 2-component systems, e.g. based on acrylate/isocyanate.

OMBRELUB RA shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. The release effect maintains also during storage at elevated temperature. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers.

AGITAN 765 is a highly effective siloxane defoamer which is specifically designed for the use in water-based wood coatings. It is especially characterized by its rapid effectiveness in combination with a good long-term effectiveness. Due to ist compatibility it is very universally applicable particularly in parquet lacquers and HVLP spray coatings.

AGITAN 156 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 156 can be used in pigmented and non-pigmented water based systems. AGITAN 156 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.

FOAMTROL 110 is an excellent low viscosity siloxane compound suitable for UV applications.